Our RT series injection blow molding machine, which is kind of three station, one step hollow molding machine. It can produce bottles from 3ml to 1000ml. Therefore it is widely applied in many packing business, such as Pharmaceutics, food, cosmetics, gift and some daily products, etc. For small bottles, compare with extrusion blow molding, injection molding machine have the advantage of light weight, even wall thickness, higher output, better bottle finishing.

Technical Specification

Injection Unit		RT 300	RT 300	RT 450		RT 600
Screw diameter	mm	40	40	45		50
Max. Injection Capacity	cm 3	158	200	250		324
Total Power for Hopper- Heating	kw	6.5	7.5	10		11.85
Controller Electric Heating	qty.	3	3	3		3
Clamping Force of Injection Mold	kn	300	300	450		600
Opening Stroke	mm	120	120	120		140
Clamping Force of Blow Mold	kn	30	60	78		89
Opening Stroke of Blow Mold	mm	120	120	120		140
Dry Cycle Time	s	6	6	5.5		8
Max. Plane Size of Mold Plate (LxW)	mm	300x200	300x240	520x390		740x390
Min. Mold Thickness	mm	180	180	240		280
Main Motor Power	kw	15	15	22		30
Mold Heating Power	kw	Self-set	Self-set	Self-set		Self-set
Pressure of Hydraulic System	mpa	14	14	14		14
Max. Working Pressure of Compressed Air	mpa	1.2	1.2	1.2		1.2
Discharge Rate of Compressed Air	m3/min	0.8	0.8	0.8		0.8
Consumption of Cooling Water	m3/h	3	3	3		5
Machine Dimension (LxWxH)	mm	3100x1100 x2200	3050x1300 x2150	4000x1670 x2350		4500x1670 x2350
Machine Weight	t	3.5	3.6	6		8
Range of Formability products	l	0.003-0.6	0.005-0.8	0.005-0.8		0.005-0.8
Height of Formability Products	mm	165	180	200		200
Dia of Formability Products	mm	100	100	100		120
Conveyer Belt Motor Power	kw	0.37	0.37	0.37		0.37
Total Power	kw	25	22.50	32		41.85
Note : We reverve the right to make some changes of product specification without notice Materials : Suitable for majority kind of Thermoplastic Resigns such as HDPE, LDPE , PP, PS and so on.